How To Figure The Standard For An Air Compressor

When you begin your search for an air compressor, there are a few things you should consider before spending your money to make sure that you select the compressor will serve all your needs, instead of following directions in best air compressor reviews only. In this article we will explain how to go about the process of selecting the compressor in accordance with the application you intend to use it for. This article combined with assessment looking at the compressor will make finding the best compressor much easier for you.

Before we can delve into and compare air compressors, we need to get familiar with some of the terms used when evaluating air compressors. Understand the technical jargon is a must when shopping for a compressor and it makes the process of finding the right one for you is much easier.

Basic Index

SCFM: Standard square feet per minute.

This is the volume of air flow or air flow capabilities. Make sure you know how much SCFM you need to operate your air tools.

PSI: The pressure per square inch.

PSI is the unit in which the pressure is measured. The rating of a compressor PSI maximum pressure indicated it can operate at.

HP: Horsepower.

The engine’s power output was measured at HP. The larger the air tank, the more HP you need to effectively fill the tank.

Gallon: The size is measured by the gallon tank.

The gallon higher rating, the longer you can operate your air tool before the tanks were refilled.

Now that we are familiar with the key terms, it is time to begin the process of selecting the compressor must. Your task in the selection of compressors in line with your needs will be much easier if you take the following points into consideration.

Location

Location is very important when choosing a compressor. This is the first thing to consider, and will determine the type of compressor you need. If you are going to work in an enclosed area with the compressor, we recommend a power supply unit with a low noise assessment. Mark noise is measured in db and the lower the number, the lower the noise. Compressors these days is much quieter than the old model, and a number of activities such as a low 60 db. At this level you will be able to have a normal conversation, standing next to it. Gas supply compressor is not recommended for use in enclosed areas without ventilation.

Power requirements

It is important to know the energy you have available (110V, 220V) and select an appropriate compressor. An air compressor does not need any power supply and are great when working on construction sites, where there is no electricity.

Once you have identified the source of energy that suits you best, you need to gather all the important information that will help you choose the best for your compressor.

– Write down the requirements and PSI SCFM of air tools that you want to run the compressor. (The manufacturer of air tools will provide this information.)

– Make sure the unit you choose can provide enough air flow (SCFM) to power all your devices.

– Make sure the unit you choose can provide enough pressure (PSI) to power all your tools.

– Do you need an air compressor, portable or fixed? Horizontal tank compressor often more mobile and can easily move around.

– What tank size you need? larger tanks for longer working time without interruption.

– You need a low noise unit? Compare ratings db to find a low-noise compressor.

When you’ve done all of the above points into consideration and to narrow the search for a certain type of compressor, look at customer reviews and ratings show that the compressor is perfect for you.

Hopefully this article will help you find that perfect air compressor for your needs. A good tip to end this article is to always read the manual properly before you use your new air compressor. Some compressors can run in such procedures is essential for the durability of the machine.